Stone Grip Anti-Slip Tile, Concrete & Stone Treatment

• Fast-Acting Solution: Increases floor traction within minutes, ensuring quick and effective slip resistance.
• Clear Matte Finish: Provides a micro-etched, clear matte finish that minimally alters appearance while increasing slip resistance.
• Mutiple Surfaces: Non-slip treatment suitable for Ceramic Tiles, Concrete, Porcelain Tiles, Terrazzo, Quarry, Brick, Slate, Travertine Most Stone or Mineral Surfaces.
• Versatile Application: Ideal for unsealed indoor and outdoor tile or stone surfaces, certified for use in food processing areas.
• Long-Lasting Protection: Easy-to-apply treatment that lasts up to 2 years, allowing immediate use after a simple 15-minute application.

• 1 Litre - 10 Square Metres
• 3.8 Litres - 35 Square Metres
• 5 Litres - 50 Square Metres

Stone Grip Non-Slip Floor Treatment for ceramic tiles, porcelain, concrete, and other stone surfaces is a fast-acting anti-slip solution that increases your slippery floor’s traction in minutes. This anti-slip tile and floor coating micro-etches your floors, providing a clear matte finish that makes little to no change in appearance while eliminating slippery floors, even when wet. The industrial-strength coating can be used in high-traffic areas to prevent slip-and-fall accidents. Stone Grip is suitable for virtually any indoor or outdoor tile or stone surface and is certified for use on floors in and around food processing areas. For outdoor anti-slip needs, such as UV and chemical protection for swimming pool areas, consider Deck Grip.

Developed in the USA, Stone Grip has been tested for over 15 years to ensure it can increase the slip resistance of ceramic tiles, porcelain tiles, or slippery stone surfaces to the equivalent of an 36+ PTV or more. Stone Grip can also be used in showers, baths, or tiled bathroom floors to ensure safety from slip-and-fall accidents. For smaller bath or shower floor solutions, see SlipDoctor’s Bathtub Grip anti-slip treatment. For fiberglass or acrylic surfaces, SlipDoctors Tub Grip anti-slip coating is recommended. Note that Stone Grip cannot be used on synthetic floors such as vinyl, lino, or laminated floors; for these surfaces, Floor Grip anti-slip wood and vinyl coating is the appropriate solution.

The Stone Grip anti-slip floor treatment is a wash-on, wash-off non-slip tile treatment that can be completed within 15 minutes. Once applied, Stone Grip’s non-slip treatment will be micro-etched into the surface, lasting up to 2 years. This water-based treatment is easy to apply, increases traction in minutes, and allows immediate use after application, with no appearance change to the treated surface. For assistance in selecting the right product for your floor, contact us.

• Read product label and Technical Data Sheet (TDS) thoroughly before application to review safety precautions, surface preparation, and full application instructions.
• Videos are available to illustrate basic application instructions.

• Always wear the recommended safety equipment.
• Avoid Stone Grip contact with all metal and glass surfaces. Do not place container on countertops.
• Do not pour Stone Grip directly from the bottle onto the floor surface. Pour into a separate container and use recommended application technique to spread solution over the surface.
• During application, do not allow Stone Grip to dry on the surface.

• Prepare surface following instructions on the TDS.
• Prepare neutralizer (baking soda + water), following instructions on the TDS.
• Prior to full application, test product in a small inconspicuous area, following instructions on the TDS.
• Review test results and, if necessary, adjust treatment and retest before full application.
• Apply Stone Grip to the surface using a tank sprayer or bucket/applicator. It may be necessary to divide larger areas into smaller areas to avoid allowing the product to dry on the surface.
• After treatment time has elapsed, spread the prepared neutralizer on the surface.
• Repeat process for all sections until the entire floor has been treated.
• Thoroughly rinse the entire treated area with clean water and dry with wet vacuum or squeegee.

• Keep surface clean and free from oil, grease, and other contaminants using household cleaner and/or degreaser.
• Scrub with a deck brush to remove build-up.
• Rinse thoroughly with clean water.
• Try SlipDoctors Maintain Grip to remove grease build-up and renew the non-slip traction.