Clear Anti-Slip Spray for Multiple Surface Types
- Enhanced Slip Resistance: Improves safety on wet and slippery surfaces such as wood, vinyl, laminate, tile floors, bathtubs, pool decks, steps, and more.
- Wide Surface Compatibility: Works effectively on various surfaces including ceramic and porcelain tiles, fibreglass, acrylic, properly prepared wood, vinyl, laminate, concrete, and metal.
- Barefoot and Pet-Friendly Finish: Provides a lightly textured, transparent coating that is safe and comfortable for both humans and pets while preserving the surface’s natural look.
- Interior and Exterior Durability: Designed to withstand harsh conditions, the coating resists oil and weather exposure, making it ideal for both indoor and outdoor use.
- Reliable Coverage and Warranty: One can protects up to 2 square meters and is backed by a 2-year manufacturer’s warranty, ensuring long-term performance and peace of mind.
- One Can: Up to 2 sq. m.
SlipDoctors Anti-Slip Spray Coating is the ideal solution for increasing slip resistance on wet and slippery surfaces across a variety of areas such as bathtubs, showers, tile floors, pool decks, steps, boats, and even wood, vinyl, and laminate flooring. This self-priming, non-slip coating is easy to apply and suitable for both interior and exterior surfaces, as it is weather-resistant once dried.
The final finish of SlipDoctors Anti-Slip Spray is a durable, lightly textured coating that is both barefoot and paw-friendly. It’s designed to work on a wide range of surfaces, including fiberglass, acrylic, ceramic and porcelain tiles, concrete, metal, and properly prepared wood, vinyl, and laminate surfaces.
SlipDoctors Anti-Slip Spray isn’t just effective - it’s also highly versatile. Whether you want to enhance safety in a bathroom, kitchen, hallway, poolside area, or on any smooth flooring, our spray provides the ideal solution for slip-prone surfaces indoors and outdoors.
Each can of SlipDoctors Anti-Slip Spray covers approximately 2 square meters and, when correctly applied, is backed by a 2-year SlipDoctors Manufacturer’s Warranty.
Important: When applying to porcelain bathtubs, please repair any chips prior to application. Repair kits can be purchased at your local home improvement store. We do not recommend using black sandpaper, as it can leave behind small black dots that may be visible after using the clear spray.
Surface Preparation: Always test a small area for color compatibility and adhesion. Fiberglass/Acrylic:Lightly sand with 220 grit sand paper to promote adhesion. Clean surface with soap and water or wipe with clean cloth and lacquer thinner (or another cleaner that does not leave residue) to remove all sanding dust. Allow it to dry thoroughly. For other surface preparation instructions, please see the Technical Data Sheet
Application:
- Step 1: Surface should be dry, clean and free of oil, wax, dirt, loose paint and other contaminants.
- Step 2: After entire surface is completely dry, properly ventilate room by opening windows, doors, turning on ceiling fans, etc.
- Step 3: Tape off application area with painters tape.
- Step 4: Mix contents of can well by shaking until the ball rattles within the can. Once ball rattles, continue to shake vigorously for 2-3 minutes. During use, shake intermittently for 10 seconds to keep product mixed.
- Step 5: Use painters paper to protect surround-ing areas from overspray. (Figure B)Spray 6 - 12 inches away from surface in a sweeping motion during application. Applying 2-3 light coats will cure, protect and look better than one heavy coat.
- Step 6: If spray stops or is irregular, turn can upside down and spray for 2-3 seconds to clear nozzle. Wipe tip, shake can and resume.
- Step 7: Slowly remove all tape and paper shortly after application. Allow 24 hours before use to allow product to fully cure. If product will be subject to prolonged periods of soaking in water, allow 48 hours before use to fully cure.
Clean Up and Removal: For effective maintenance and safe storage, follow these guidelines: To remove overspray, use paint thinner or lacquer thinner. It's crucial to clean the valve immediately before storing a partially used can. Hold the can upside down and spray until only clear gas dispenses (about 3 to 5 seconds), then wipe the tip before storage. Should the spray valve get clogged, remove and clean it using lacquer thinner, ensuring the opening faces away from the body during replacement. For product removal, if desired, acetone can be used. For comprehensive instructions, consult the Non-Slip Spray Clear and White Technical Data Sheet.
