Anti-Slip Spray for Vinyl, Laminate and Wood Floors and Stairs
Anti-Slip Spray for Vinyl, Laminate and Wood Floors and Stairs
Anti-Slip Spray for Vinyl, Laminate and Wood Floors and Stairs
Anti-Slip Spray for Vinyl, Laminate and Wood Floors and Stairs
Anti-Slip Spray for Vinyl, Laminate and Wood Floors and Stairs
Anti-Slip Spray for Vinyl, Laminate and Wood Floors and Stairs
Anti-Slip Spray for Vinyl, Laminate and Wood Floors and Stairs

Anti-Slip Spray for Vinyl, Laminate and Wood Floors and Stairs

Regular price£58.00

BULK DISCOUNTS AVAILABLE

/
  • Increases Slip Resistance: Significantly boosts traction on vinyl, laminate, and wood surfaces without altering their appearance.
  • Easy Application: Simple spray-on process that transforms slippery floors into safe, secure surfaces in just a few steps.
  • Durable and Long-Lasting: Withstands heavy foot traffic, spills, and cleaning while maintaining its non-slip effectiveness.
  • Versatile Use: Ideal for both indoor and outdoor areas, including commercial spaces, residential homes, and high-traffic areas.
  • Quick Drying: Cures and dries within 12 to 24 hours, providing immediate slip resistance once fully set.
  • One Can: Up to 2 sq. m.

Are you looking for a way to increase your vinyl, wood, or laminate floor or step grip and safety without having to install a new floor? Look no further! Our Extra Fine non-slip spray is the perfect solution to provide ultimate grip and safety for you, your loved ones, or customers. Our anti-slip flooring spray offers numerous benefits, significantly increasing slip resistance without altering the appearance of the surface. This allows you to enjoy a safer environment without compromising the aesthetics of your space. The spray is also incredibly easy to apply, transforming slippery floors into safer, more secure surfaces with just a few simple steps. Whether you have a commercial space with heavy foot traffic or a residential area where slip accidents are a concern, our anti-slip floor spray is the ideal solution.

Applying our non-slip vinyl spray is quick and easy. Begin by ensuring the surface is clean and dry, removing any dirt or debris. Shake the can well to mix the ingredients, then test the spray on a small, inconspicuous area. Once satisfied, hold the can approximately 10-12 inches from the surface and apply an even layer, focusing on high-traffic or moisture-prone areas. Allow the spray to dry completely, typically taking around 12 to 24 hours, before allowing any foot traffic. By following these steps, you can easily apply our non-slip vinyl, wood, and laminate spray, enjoying enhanced safety and grip on your floors.

Durability is a key factor when choosing a non-slip solution for your vinyl, laminate, lino, or wood surfaces. Our Extra Fine Non-Slip Vinyl Spray stands out due to its exceptional durability, withstanding heavy foot traffic, spills, and cleaning without losing effectiveness. The high-quality ingredients create a strong bond with the surface, ensuring long-lasting non-slip properties. Whether in a busy household, commercial space, or moisture-prone area, our Non-Slip Vinyl Spray provides the durability you need. You can trust our product to maintain its grip in high-traffic areas or challenging environments, offering a reliable, long-lasting solution for slip-resistant surfaces. Say goodbye to constantly worrying about slips and falls and enjoy the confidence of a safe, secure environment with our durable non-slip spray.

 

Safety Precautions: When handling the Extra Fine Non-Slip Spray, it's crucial to prioritize safety precautions. Apply in a well-ventilated space and strictly avoid any proximity to open flames to prevent potential hazards. Additionally, when scraping, sanding, or removing old paint from surfaces, there's a risk of releasing lead dust, which is toxic. For guidance and information on lead-related concerns, contact the National Lead Hotline at 1-800-424-LEAD or visit www.epa.gov/lead. It's highly recommended to use appropriate safety equipment, including chemical-resistant gloves, eye protection, and a mask, to safeguard against any potential risks during application and handling.

Surface Preparation: Varies by surface. Please see chart below for preparation for specific surfaces. ALWAYS: Test a small area for color compatibility and adhesion. For best results, spray between 70-90F / 20-32C. Applying SlipDoctors Non-Slip Spray below 50F/10C will cause the paint to spray and/or dry improperly. Dry time decreases with higher temperatures and increases with lower temperatures.

Application Instructions:
  • Step 1 - Test: Extra Fine Clear Spray should be tested on a small inconspicuous area before full application.
  • Step 2 - Mixing: Mix contents of can well by shaking until the ball rattles within the can. Once ball rattles, continue to shake vigorously for 2-3 minutes. During use, shake intermittently for 10 seconds to keep product mixed.
  • Step 3 - Application: Spray 6-12 inches away from surface in a sweeping motion during application. When applying, note that 2-3 light coats are recommended rather than 1 heavy coat.
  • Step 4: If spray stops or is irregular, turn can upside down and spray for 2-3 seconds to clear nozzle. Wipe tip, shake can and resume. IMPORTANT: Before storing partial can, clean valve immediately after use. To clean: Hold can upside down and spray until only clear gas comes out (approximately 3 seconds), then wipe tip and store. If spray nozzle becomes clogged, remove and clean in lacquer thinner.
  • Step 5 - Clean Up: If overspray occurs, area can be cleaned with paint thinner.

Maintenance: For best results, to remove oily deposits or other foreign matter, apply pH-neutral cleaner at recommended dilution rate and scrub lightly with a soft bristle brush. For general cleaning and maintenance, use a light-pressure rinsing.

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Joyce P.
Brilliant

Fantastic solution for our slippy wooden stairs that we did not want to put a carpet on. Has made a huge difference to everybody’s safety, including the dogs. Worth every penny. We have only put it on recently so cannot comment on whether it lasts long. If it does not last long, then it will not be worth the money, but I am hopeful that it will last a good long time.

F
Farida S.
Definitely works

Really pleased with result. Purchased to prevent my dog slipping when walking on laminate flooring and it has worked. Easy to apply, the nozzle occasionally blocks but shaking it again helps release it. Not sure one spray covers quite as much surface as stated, so pleased I purchased 2 cans. Can't see it at all on the floor and simply feels like a very fine sandpaper when applied. Only applied it a few days ago so can't comment yet on how long it lasts. A bit expensive per spray can in my opinion, however it definitely does work, which is great. No more slipping! The dog is also very happy - so I'm happy too to recommend.

S
Stefan M.
It works !

I don’t know how is it going to be in long term
But it definitely works now!

N
Niall R.
Very Pleased and recommend

I am very surprised at how effective this is as I thought it would simply lessen the slippiness but instead it offers a finish which helps with grip too. It is simple to apply and leaves a nice finish. It is important to make sure the wood has been properly cleaned prior to application to get the best finish. It is a very good product and one that I throughly recommend as it has saved me sticking non slip strips to our staircase.

Hi Niall, thank you for taking time to review our product. Team SlipDoctors

R
Russell M.
non slip spray that works

Installed luxury vinyl tiles in our small reception area that I almost really regretted before finding this product on Google

Hi Russel, thanks for taking the time to review our anti-slip spray. We are happy to hear that the reception area is now safe to walk on. Team SlipDoctors