Polish Grip Anti-Slip Coating & Sealant for Slippery Polished Tiles
- Enhanced Slip Resistance: Increases traction on polished, glossy surfaces like marble, granite, ceramic, and porcelain tiles.
- Surface Protection: Acts as a penetrating sealer to guard against spills and stains without altering the natural shine or color.
- Weather Resistant: Forms an invisible barrier suitable for both indoor and outdoor use on a variety of surfaces, including natural stone and concrete.
- Long-Lasting: Provides up to 12 months of protection with each application, with the option to apply multiple coats over time for extended durability.
- Manufacturer's Warranty: Comes with a 1-year manufacturer’s warranty, ensuring reliable and effective anti-slip protection.
- 3.8 Litres - 200 to 220 square metres
- 470ml - 20 to 25 square metres
NOTES
- Read product label and Technical Data Sheet (TDS) thoroughly before application to review safety precautions, surface preparation, and full application instructions.
- Videos are available to illustrate basic application instructions.
- Always wear the recommended safety equipment and follow safety precautions.
- Clean surface thoroughly with pH-neutral cleaner.
- Surface must be clean and dry before application.
- Do not apply if it has rained in the last few days or if humidity level is high.
- Protect exposed surfaces including wood, carpet, metal, and landscaping.
- Due to variations in substrates, perform a sample test to ensure maximum performance and suitability for the intended use. Test product in an inconspicuous area and allow to fully cure to test results.
- Do not thin or dilute. Apply Polish Grip evenly to surface until damp using a clean white towel, microfiber towel, or Polish Grip Applicator. Leave on surface for 3-5 minutes for maximum penetration.
- Remove excess product using a new clean white towel, microfiber towel, or carpet bonnet before product dries.
- Any excess residue that dries on the surface can be removed by re-applying a small amount of Polish Grip and immediately wiping off excess while wet. If a second application is desired, wait at least one hour before applying.
- Polish will fully cure in 24-72 hours, depending on conditions.
- CLEAN UP: Dispose of all application materials in accordance with local regulations. Do not wash or reuse.
- For general cleaning, use a pH-neutral cleaner and a soft mop or use low-pressure rinsing. Avoid scrubbing.
- The use of buffing machines is not recommended.
